Notes: worked radiation calculations
Each note starts from a question people working with radiation actually ask, then solves it with real numbers, one line of arithmetic at a time. The figures come from the same engine and nuclide data as the calculators on this site, so you can type the inputs into a calculator and get the answer shown. Where a calculator cannot do a step, the note says so and shows how to do it by hand.
Every note gives the date it was published, the date its figures were last reviewed, the sources it relies on and the calculators it uses. New notes appear at the top. The numbers in the examples are illustrations, not advice for a particular source, patient or laboratory: a prescription, a tolerance or a reporting limit comes from your own procedure and regulator, and a calibrated measurement is always what counts.
-
How much is left? Radioactive decay worked examples
A half-life and an elapsed time are given. What fraction remains, and why can two correct answers differ?
The 2^(−t/T½) rule with a table of half-lives, a textbook Ra-228 problem solved with the printed half-life and with the evaluated one, a Cs-137 check source brought from its certificate date to today, and a Co-60 reading taken back to its certificate.
-
Lu-177 decay calculation: a 7.4 GBq dose worked through
How much Lu-177 has to be labelled days ahead, what does a delay cost, and what is left a week or two later?
One therapy dose from calibration to storage: the activity needed for each transit time, a Monday calibration carried to a Thursday infusion, the window around a ±10% tolerance, a time-zone slip, the vial at 7 and 14 days, and when Lu-177m decides storage.
-
Minimum detectable activity: an MDA calculation worked step by step
What is the smallest activity a given count could reliably have seen, and how is a result read against it?
A one-hour Cs-137 gamma count taken from background to critical level, detection limit and becquerels with the equations the MDA calculator uses, three possible results read against those limits, paired against well-known blanks, and the errors that move the answer most.
Longer notes on shielding materials, check sources, natural series and the limits of the dataset are listed on the Methods page, along with where the data comes from and how the pages are written. Values that have changed between versions are in the change record.